Is There Local Cell Tower Repair Work
You should upgrade or use an alternative browser.
- #1
- #2
The next tower over when I would lock onto it would be perfectly fine...
The only solution I could find was installing an airrave so I didn't use either tower.
If you complain enough they may give it to you for free*
- #3
Get an Airave or use wifi for your data needs.
- #4
- #5
- #6
however this is the
violetgem.com blog lte-wcdma-gsm-how-to-lock-on-a-specific-cell-tower-on-samsung-galaxy-s6
where there is space put forward slash you will get the link
- #7
i know a link for samsung handset but i use different handset and i am unable to post link as xda policy is new user can post outside link after 10 post
however this is thevioletgem.com blog lte-wcdma-gsm-how-to-lock-on-a-specific-cell-tower-on-samsung-galaxy-s6
where there is space put forward slash you will get the link
Sometimes you need to lock on a specific cell tower due to bad cell conditions such as low data speed or because you need to test another nearby cell condition. I will teach you how to do that on Samsung Galaxy S6.
You need to run a secret code but Samsung has prevented you to run it from the phone Dialer, so you need to root your phone and manually execute the command.
Do the job at your own risk. We won't take responsibility if any damage is caused.
Requirements:
– A rooted Samsung Galaxy S6 / S6 Edge.
– Terminal Shortcut app. You can get it from Google Play Store
Follow the instructions:
1. Open Terminal Shortcut app.
2. Create a new Local Android/Linux shell shortcut and set the command to the following code:
am broadcast -a android.provider.Telephony.SECRET_CODE -d android_secret_code://2580
1
am broadcast -a android.provider.Telephony.SECRET_CODE -d android_secret_code://2580
3. Check 'Run with root privileges' and un-check 'Show output' then tap save.
4. Run the shortcut and a window similar to the one below will open:
2580menu
Get Current Cell Information
Before you begin, there are 3 pieces of information you need to get from LTE-BASIC Info window. you can open the info window by dialing *#0011# or running the previously created shortcut and go to Protocol > Basic Information.
LTE Cell Locking
1. Go to UE Setting & Information > Setting > Protocol > AS > Frequency Lock > LTE Cell Locking.
2. Set the following as instructed, then tap on Cell Locking:
– Band: The band on which your LTE provider operates.
– EARFCN: Equals to DL Frequency.
– PCI(Physical Cell Identifier): To lock on a specific cell, you need to know PCI numbers of the cell towers around you, unfortunately you can't get a list of neighbour cells from your device so you need to collect them by going near the cell towers and write them down.
3. Reboot your device.
WCDMA Cell Locking
1. Get neighbour cells PSCs from Protocol > AS Information > Neighbour Cell Information.
2. Go to UE Setting & Information > Setting > Protocol > AS > Frequency Lock > WCDMA Cell Locking.
3. Set Band, UARFCN and PSC then tap on Cell Locking.
4. Turn On/Off Airplane Mode.
GSM Cell Locking
1. Get neighbour cells ARFCNs from Protocol > AS Information > Neighbour Cell Information. Values displayed here are in HEX, you need to convert them to DEC.
2. Go to UE Setting & Information > Setting > Protocol > AS > Frequency Lock > GSM Cell Locking.
3. Set Band and ARFCN then tap on Cell Locking.
4. Turn On/Off Airplane Mode.
Reset Cell Locking
1. Go to UE Setting & Information > Setting > Protocol > AS > Frequency Lock > Reset.
2. Reboot your device
Similar threads
Is There Local Cell Tower Repair Work
Source: https://forum.xda-developers.com/t/is-there-any-way-to-lock-onto-a-specific-tower.1343623/
0 Response to "Is There Local Cell Tower Repair Work"
Post a Comment